引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1541次   下载 1578 本文二维码信息
码上扫一扫!
分享到: 微信 更多
钛合金在海水中电偶腐蚀性能研究
朱相荣1, 邹中坚1, 陈振进1, 朱 霞1
青岛海洋腐蚀研究所
摘要:
本文研究了几种典型国产钛合金在天然海水和80℃热海水中与铜合金、不锈钢以及不同钛合金之间(在表面积相同条件下)相互接触时的电偶腐蚀行为。结果表明,不同钛合金之间可以匹配使用;钛合金与铜合金或不锈钢接触时能加速后者的腐蚀,但在面积比不大的情况下这种加速作用不大。
关键词:  
DOI:
分类号:
基金项目:
THE STUDY OF GALVANIC CORROSION OF TITANIUM ALLOYS IN SEAWATER
Abstract:
Galvanic corrosion of titanium alloys was studied in natural and hot sea water in coupling with stainless sted copper-nickel alloy (made in China). Cathodic polarization curves of several titanium alloys showed that titanium alloys have higher oxygen reduction super-potential. That is, oxygen is reduced much easier on titaium alloys than on stainless steels or on coppernickel alloy. Open circuit potential-time curve and galvanic current-time curve of titanium alloy coupled with stainless steel or copper-nickel alloy in natural sea water and in hot sea water of 80℃, shows that the galvanic currents are little, which is consistent with the corrosion rate before and after coupling of the alloys. Therefore, contacting with B30 or 18-8ss will not accelerate the corrosion of the latters intensively. Further study shows that there is no galvanic corrosion between the two titanium al-loys themselves.
Key words:  
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.