引用本文:
【打印本页】   【下载PDF全文】   【View/Add Comment】  【Download reader】  【 Close 】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 1958次   下载 2400次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
基于LabVIEW的波浪驱动测量系统仿真设计
姜静波1, 龚德俊1, 李思忍1, 徐永平1, 陈永华1
中国科学院海洋研究所
摘要:
提出了一种通过虚拟仪器软件LabVIEW 对水下测量系统进行仿真的方法, 通过受力分析, 可以近似地模拟出波浪驱动测量系统在水中的工作状态, 为系统合理地布放提供有效的搭配方案。
关键词:  LabVIEW  虚拟仪器  仿真  测量系统
DOI：
分类号:
基金项目:中国科学院重大科研装备研制项目( YZ0619)
A simulation design based on LabVIEW for a water wave energy mooring system
Abstract:
The simulation method based on LabV IEW for a water wave energy mooring system is provided here. The virtual instruments software is used to evaluate and simulate the working condition of the under water system after its dynamic analysis. Based on this, we can present a more reliable assembling and deployment protocol for the underw ater system.
Key words:  LabVIEW  virtua linstrument  simulation,  meterage system
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.