引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2487次   下载 2573 本文二维码信息
码上扫一扫!
分享到: 微信 更多
一种深海热液原位探测设备供能装置的设计
吴怀超1, 谭春阳2, 金 波2, 杨灿军2, 陈 鹰2
1.贵州大学机械工程学院;2.浙江大学流体传动及控制国家重点实验室
摘要:
为了解决深海热液原位探测设备的能量供给问题, 设计了一种实用的供能装置。该供能装置采用了一种定制的高能量密度电池, 电池组的容量达31.5 Ah, 最大输出电压为12 V。供能装置的耐压壳体采用了压力容器的设计原则进行设计, 其最大承受压力达70 MPa。放电实验表明该供能装置具有较稳定的放电电压; 海试实验表明该供能装置能用于深海高压环境。
关键词:  深海热液  原位探测  压力容器  供能装置
DOI:
分类号:
基金项目:国家自然科学基金重点项目(40637037)
Design of an energy supplying device for equipments for in-situ detection of deep-sea hydrothermal fluid
Abstract:
In order to solve the energy supplying problem of in-situ detection equipment for deep-sea hydrothermal fluid, a practical energy supplying device was designed. A custom-made battery with high energy density was used in the energy supplying device. The capacity of the assembled battery reached 31.5Ah, and its maximal output voltage was 12V. Pressure casing of the energy supplying device was designed according to the design principle of pressure vessel, with a maximal load pressure of 70 MPa. The discharge experiment showed that the discharge voltage of the energy supplying device was stable; and the sea trial experiment confirmed that the energy supplying device functioned properly in deep-sea high pressure environment.
Key words:  deep-sea hydrothermal fluid  in-situ detection  pressure vessel  energy supplying device
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.