引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2160次   下载 2980 本文二维码信息
码上扫一扫!
分享到: 微信 更多
海底管线区浅表层土孔压静力触探参数特征及应用
陈小玲1, 陈培雄1, 陈锡土1, 吕小飞1
国家海洋局 第二海洋研究所 工程海洋学重点实验室
摘要:
利用东海陆架海底输油管道路由调查获得的孔压静力触探数据和钻探资料等, 采用统计分析的方法, 对管道路由区5m以浅土体的孔压静力触探曲线特征、土的分类方法鉴别作了探讨, 结果表明:研究区5m以浅黏性土的锥尖阻力(qc), 侧摩阻力(fs)值较小, 且随深度呈线性增加, 粉质土的qc, fs值增大, 但随深度线性增加规律不明显, 砂类土的qc值急剧增大, 但fs 值变化不大; Robertson 法和Eslami-Fellenius 法两种土类划分方法均适用于研究区浅表层软土的土类划分, 但Robertson 法在判别粉质土时受到一定限制, Eslami-Fellenius 法判别较为准确, 应用简单。本研究可为我国在海底管线工程路由勘察中直接利用孔压静力触探(CPTU)参数划分土层和判别土类作铺垫。
关键词:  海底管线区  浅表层土  孔压静力触探试验  土分类
DOI:
分类号:
基金项目:浙江省自然科学基金项目(Y5100027); 国家海洋第二海洋研究所专项资金资助项目(JG200805)
Characteristics of pore pressure static cone penetration test parameters and its application of surface soil in pipeline laying areas
Abstract:
Based on the pipeline route survey data in the East China Sea, using statistical analysis technique, the characteristics of pore pressure static cone penetration test (CPTU) curves and soil classification in 5 m shallow soil are discussed. It was found that the characteristics of CPTU curves and parameters were different for clay, silty and sandy soils in pipeline area. The value of qc or fs in clay was small and increasing with depth linearly, but the value for the silt or sand was not so. The soil classification methods of Eslami-Fellenius is simpler and more accurate than Robert’s. The results of this paper can be applied in layers discriminating and soil classification using CPTU in pipeline route survey in China.
Key words:  pipeline laying area  surface soil  pore pressure static cone penetration test(CPTU)  soil classification
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.