引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2246次   下载 1684 本文二维码信息
码上扫一扫!
分享到: 微信 更多
黄姑鱼胚胎发育及其与温度和盐度的关系
黄贤克1,2, 单乐州1,2, 闫茂仓1,2, 柴雪良1,2, 胡利华1,2, 邵鑫斌1,2
1.浙江省海洋水产养殖研究所;2.浙江省近岸水域生物资源开发与保护重点实验室
摘要:
为研究温度和盐度对黄姑鱼(Nibea albiflora)胚胎发育的影响, 作者观察了黄姑鱼受精卵的形态和胚胎发育过程。实验结果表明, 温度18~28℃范围内, 温度对孵化时间和初孵仔鱼有显著影响, 对孵化率影响不大, 24~28℃是黄姑鱼胚胎发育的适宜温度范围; 盐度低于24时受精卵下沉, 26~28内悬浮于水体中, 盐度高于34时受精卵浮于水面; 黄姑鱼胚胎发育的最适盐度范围26~32, 盐度超过或低于其适宜范围时, 孵化率明显下降或者幼虫畸形率明显增大。另外, 根据其Q10值推算的胚胎发育的适宜水温与实验结果相似。
关键词:  黄姑鱼(Nibea albiflora)  胚胎发育  温度  盐度
DOI:10.11759/hykx20160920003
分类号:
基金项目:温州市科技计划项目(N20140039, N20150015)
Embryonic development of Nibea albiflora and the effects of temperature and salinity on embryogenesis
HUANG Xian-ke,SHAN Le-zhou,YAN Mao-cang,CHAI Xue-liang,HU Li-hua,SHAO Xin-bin
Abstract:
This study investigated the embryology and the effects of temperature and salinity on the early development of the potted maigre Nibea albiflora. The results showed that temperature (18–28℃) significantly influenced the hatching time and the hatched larvae, but the impact on the hatching rate was not significant. The temperature range of 24–28℃ was appropriate for embryonic development. The optimum salinity range was 26–32 for the embryonic development, and higher or lower salinity resulted in a lower hatching rate or higher larval deformity rate. The fertilized eggs sunk in water (at salinity lower than 34), suspended in water (at salinity 26–28), and floated on water (at salinity higher than 34). In addition, according to the results of Q10 calculation, the appropriate water temperature for embryonic development was similar to the experimental results.
Key words:  Nibea albiflora  embryonic development  temperature  salinity
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.