引用本文:
【打印本页】   【下载PDF全文】   【View/Add Comment】  【Download reader】  【 Close 】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 1950次   下载 2649次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
利用遥感SST反演上层海洋三维温度场
张春玲
中国海洋大学；国家海洋局第二海洋研究所
摘要:
通过统计相关分析检验验证了一个简单的温度参数模型在太平洋海域的较好适用性。进而基于Argo观测资料及WOA09气候态温度数据，采用最大角度法求得此模型的相关参数，并利用高分辨率的卫星遥感海表温度反演了太平洋上层海域空间分辨率为11 的气候态月平均三维温度场。通过与实测资料的比较分析，表明反演结果是较为真实可靠的，可作为海洋数值模式积分的初猜场，并为实现现场观测（如：Argo）与卫星观测的优势互补，构建太平洋海域完整的三维温度分析场提供一种新途径。
关键词:  热盐结构模型  最大角度法  Argo观测  SST  反演
DOI：10.11693/hyhz20120928003
分类号:
基金项目:海洋公益性专项, 201005033号; 科技基础性工作专项, 2012FY112300号; 国家海洋局第二海洋研究所基本科研业务费专项, JT0904号。
Inversion of Subsurface Temperature from Sea Surface Temperature
ZhangChunLing
ocean University of China；Second Institute of Oceanography
Abstract:
A simple vertical thermal structure is proved to be applicable to the Pacific Ocean through correlation analysis test. Based on the Argo observations and WOA09 climate data, we determine the parameters with the maximum angle method. Then in the Pacific Ocean, a three-dimensional subsurface temperature field whose spatial resolution is 1 ° x 1 ° is inversed from high-resolution sea surface temperature. Compared with the observational temperature profiles, the inversion result is reliable and can be assimilated into the system of the ocean reanalysis as pseudo temperature observation. That will provide a strong theoretical basis and solid data base for realizing complementary advantages of the situ observation (such as Argo) and the satellite observation, which is conductive to construct the complete temperature analysis field.
Key words:  Thermal structure  Maximum angle method  Argo observation  SST  Inversion
Copyright ©  Editorial Office for Oceanologia et Limnologia Sinica    Copyright©2008 All Rights Reserved
Supervised by: China Association for Science and Technology   Sponsored by: Chinese Society for Oceanology and Limnology, Institute of Oceanology and Limnology, CAS.
Address: 7 Nanhai Road, Qingdao, China.    Postcode: 266071    Tel: 0532-82898753  E-mail: liuxiujuan@qdio.ac.cn  
Technical support: Beijing E-Tiller Co.,Ltd.