引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1752次   下载 2662 本文二维码信息
码上扫一扫!
分享到: 微信 更多
莱州湾东部外航道回淤预测及影响因素
朱龙海1,2, 徐永臣3, 王 楠3, 胡日军1,2, 姜胜辉1,2, 张 伟2
1.中国海洋大学 海底科学与探测技术教育部重点实验室;2.中国海洋大学 海洋地球科学学院;3.青岛海大工程勘察设计开发院有限公司
摘要:
为探讨外航道回淤特征, 采用二维波浪潮流泥沙数学模型, 模拟研究了莱州湾东部航道回淤情况并探讨了其影响因素, 以期对航道泥沙输运研究提供借鉴。研究表明, 正常天气下, 水流跨越航道,流速减小、挟沙能力下降导致的悬沙落淤是航道淤积的主要原因, 但淤积量有限。大风浪是造成航道淤积的主要动力因素, 其淤积泥沙主要来源于海底侵蚀来沙, 河流来沙和沿岸输沙对航道淤积的贡献不大。从水深地形、泥沙来源、底质类型、水文动力条件等方面分析, 航道发生骤淤的可能性较小。
关键词:  莱州湾  航道  回淤  影响因素
DOI:10.11759/hykx20140711001
分类号:
基金项目:国家自然科学基金项目(41106039)
Siltation prediction and influencing factors of the outer channel in the eastern Laizhou bay
Abstract:
To explore the characteristics of the outer channel siltation, we studied the siltation and influencing factors of the outer channel in the Laizhou Bay by using a 2-D mathematical modeling of sediment transport under the co-action of waves and tidal currents. The research results can provide a study reference for the sediment transport of channel. Under normal weather, the main cause for channel siltation is the silting of the suspended sediment resulted from the decrease in current speed and carrying capacity when the water flows across the channel. The Sediment thickness is limited under normal weather. The large waves are the major power causing factor of siltation of waterways. The sediment of channel is mainly from the erosion sediment of seabed. Rivers and coastal sediments contribute little to the deposition of the channel. Based on the analysis of the topography, sediment sources, sediment type, and hydrological conditions, sudden siltation is less likely to occurr.
Key words:  Laizhou Bay  channel  siltation  influencing factors
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.