首页 | 期刊介绍 | 编委会 | 道德声明 | 投稿指南 | 常用下载 | 过刊浏览 | In English
引用本文:袁帅,赵霞,金祖权,段继周,侯保荣.静电纺丝技术制备纳米纤维复合环氧涂层及其海洋防腐性能[J].海洋科学,2020,44(8):231-238.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 739次   下载 571 本文二维码信息
码上扫一扫!
分享到: 微信 更多
静电纺丝技术制备纳米纤维复合环氧涂层及其海洋防腐性能
袁帅1, 赵霞1,2,3,4, 金祖权2, 段继周1,3, 侯保荣1,3
1.中国科学院 海洋研究所 海洋环境腐蚀与生物污损重点实验室, 山东 青岛 266071;2.山东省蓝色经济区工程建设与安全协同创新中心, 青岛理工大学, 山东 青岛 266033;3.青岛海洋科学与技术试点国家实验室 海洋腐蚀与防护开放工作室, 山东 青岛 266237;4.中国科学院海洋研究所 海洋大科学中心, 山东 青岛, 266071
摘要:
纳米纤维可以填补有机涂层中存在的孔隙和微裂纹,并提高其抗腐蚀能力。本文介绍了一种利用静电纺丝方法在Q235碳钢表面制备纳米纤维,并与有机环氧树脂复合,进而提高树脂防腐性能的技术。制备了环氧-纤维复合涂层(PAN-NFs/EP),采用电化学方法以及盐雾实验对复合涂层的防腐性能进行了表征,结果表明嵌入了纳米纤维的环氧复合涂层,其电化学阻抗提高了两个数量级,防腐性能明显提高。本研究对静电纺丝技术在海洋防腐中的应用具有一定的参考价值。
关键词:  纳米纤维  静电纺丝  Q235碳钢  复合涂层  防腐性能
DOI:10.11759/hykx20200308001
分类号:TL214+.6
基金项目:国家自然科学基金(51678318,41827805);国家重点研发计划项目(2017YFB0903702);山东省重点研发计划项目(2018GGX102035)
Preparation of composite epoxy coating by electrospinning to enhance its anticorrosion performance under marine envi-ronment
YUAN Shuai1, ZHAO Xia1,2,3,4, JIN Zu-quan2, DUAN Ji-zhou1,3, HOU Bao-rong1,3
1.CAS Key Laboratory of Marine Environmental Corrosion and Bio-fouling, Institute of Oceanology, Chinese Academy of Science, Qingdao 266071, China;2.Cooperative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone, Qingdao University of Technology, Qingdao 266033, China;3.Open Studio for Marine Corrosion and Protection, Pilot National Laboratory for Marine Science and Technology(Qingdao), Qingdao 266237, China;4.Center for Ocean Mega-Science, Chinese Academy of Science, Qingdao 266071, China
Abstract:
Nanofibers can fill pores and microcracks existing in organic coatings and improve their corrosion resistance. This paper describes a technique for preparing nanofibers on the surface of Q235 carbon steel using electrostatic spinning and compounding them with organic epoxy resin to improve the corrosion resistance of the resin. The spinning process was studied in detail, optimal spinning parameters were selected, and the epoxy-fiber composite coatings (PAN-NFs/EP) were prepared. Electrochemical test methods and salt spray experiments were used to characterize the anticorrosive properties of the composite coatings. The results showed that the electrochemical resistance of the epoxy composite coatings embedded with nanofibers increased by two orders of magnitude and that the anticorrosive properties were significantly improved.
Key words:  Nanofiber  electrospinning  Q235 carbon steel  composite coating  anticorrosive performance
版权所有 《海洋科学》 Copyright©2008 All Rights Reserved
主管单位:中国科学院 主办单位:中国科学院海洋研究所
地址:青岛市市南区福山路32号  邮编:266071  电话:0532-82898755  E-mail:marinesciences@qdio.ac.cn
技术支持:北京勤云科技发展有限公司